A side stem wall has been framed and bolted through the frame with four 1/2 inch bolts. Each bay of the wall gets insulated.
Inside face of each wall is faced with doorskin. The outer face has 1/4 marine plywood face.
Brackets to support the ledges have been attached to the side walls with lag screws. The foot of each bracket also rests in a stake pocket on the frame. Note: the project has been moved outside! New taillights attached to the rear brackets.
Framing the inner stem walls. These will be screwed down into the deck and into the cross members, and will also be insulated and skinned.